|
|
Design of a 22 kV network in the Lipno area after the integration of the new 110/22 kV transformer station
Žižlavský, Jakub ; Koudelka, Jan (referee) ; Ptáček, Michal (advisor)
This diploma thesis deals with the design of a new 110/22 kV substation in Horní Planá. The substation design addresses, for example, the issue of reducing the load of surrounding power lines from 110/22 kV substations, reducing the size of short-circuit ratios in the surrounding system, reliability and continuity of supply, etc. Furthermore, loads of individual outgoing feeders from the surrounding substations are analyzed, in case they will be connected to a new substation. Following this, the work also addresses the related new decay points of the lines, which are determined by calculation and simulation in the Grizzly program. The simulation results could be used to compare the current load status of individual lines and contribute to the assessment of the possible benefits of both the new substation and the implementation of other modern technologies for faster and more efficient measurement and handling during operating and fault conditions.
|
|
|
High voltage power supply for dielectric strength
Klejma, Michael ; Červinka, Dalibor (referee) ; Martiš, Jan (advisor)
This thesis deals with a choice of proper solution of high votlage source with regulated DC output in range of 0 – 50 kV. Source will be used for testing of electrical insulators, with function of displaying voltage at which breakdown of the insulator occured. Due to low output current up to 1 mA it is possible to use a cascade voltage multiplier as suitable solution. The voltage multiplier is powered by switching-mode power supply with high voltage pulse transformer. The inverter uses single-acting innovative topology that enables a supply of alternating current to the voltage multiplier. This solution is simple, but an analysis of operation is difficult, as will be described in details in this thesis. Realization and testing of the source has been successfully done, but the source had problems with its own EMC. After debugging, requested parameters have been achieved.
|
|
|
Proposal of the reconstruction of 0,4 kV distribution network in a specific area
Fojtík, Martin ; Beneš, Jan (referee) ; Blažek, Vladimír (advisor)
This Master’s thesis deals with the problem of distribution electrical network with a focus on solving the steady operation of the electrical distribution network for E.ON Brno - Lisen. The calculation is made by using BIZON PAS Off-Line. The first part of thesis is specialized on the distribution of individual LV and MV networks.The second part of thesis is specialized on the general calculation of the steady operation distribution network and describe criteria for the design and evaluation of this network. In the practical part is calculate existing network in selected area in which is located 53 distribution transformers. In the final part is evaluate the status of existing network and perform design optimization and assessment of this network.
|
|
|
Design of Protection Relays for MV Distribution Grid
Sochor, Tomáš ; Bukvišová, Zuzana (referee) ; Toman, Petr (advisor)
The master´s thesis deals with the design of medium voltage power line protection and the calculation of reliability indicators. First, it deals with the possibilities of power system operation. Subsequently, it divides the networks according to the grounding of the transformer node and the switching elements and devices occurring in the MV distribution network are mentioned. It presents the basic classification of power line protection and its use, especially it focuses on overhead and cable MV power lines. It also discusses the reliability of the power supply and lists the basic reliability indicators and their possible calculation. The practical part describes the changes in the considered area of the distribution network, where the reconstruction of the power line VN872 and a new way of powering the village Drnholec will take place. The impact of this change on the reliability of the supplied energy is also calculated. Furthermore, the protection of the power line is designed and the correctness of its setting is then verified on the model in the PSS Sincal software.
|
|
|
Autonomous and dispatching control of distributed power generating plants operated in the HV distribution system
Dvořáček, Jiří ; Jurík, Michal (referee) ; Drápela, Jiří (advisor)
Theses focuses on the evaluation of the possible means of active and reactive power control of generating units connected to medium voltage. First part summarizes analysis of Czech Republic medium voltage distribution grid. It summarizes means of autonomous and dispatcher control of generating units with respect to European Comission directive RfG, standard ČSN EN 50549-2 and national implementation PPDS. Following parts provide description of generating unit and distribution grid models used for simulation in PSCAD. Last part focuses on evaluation of results obtained via simulating steady-state scenarios as well as continuous simulation.
|
|
|
Proposal of design and configuration of 22 kV network after installation of 110/22 kV transformation in Brno-Sever switching substation
Mišinger, Ondřej ; Beneš, Jan (referee) ; Blažek, Vladimír (advisor)
The theoretical part of this thesis deals with distribution networks in terms of distribution according to different criteria, describes the main elements of electric distribution networks and their qualities. The following describes the methods of calculating the steady state of electrical networks. These methods are nowadays used as basics for computer programs. In the penultimate chapter of the theoretical part are summarized the principles for the development of present networks and construction of new electrical networks. The aim of practical part of the thesis is to assess the current condition of the network 22 kV in the city of Brno and assess the condition after installation of 110/22 kV transformation in Brno-Sever switching substation. After evaluating the results of steady state electrical network and identifying certain problems is the following aim a proposal of solving problems that emerged in the network. The result should be operational, functional and reliable electric distribution network. This thesis used to calculate the steady state electrical networks by software PAS DAISY Off-Line Bizon V4.
|
|
|
Design of placing high voltage electrodes of the projection set of electron microscope on insulating rods
Pavlas, Ondřej ; Musil, Vladislav (referee) ; Hejátková, Edita (advisor)
In it´s first part, this presented master´s thesis focuses on the problematics of actions taking place in dielectric materials and phenomenons on the surface of real insulators placed in electric field. This research is followed by selection and rating of appropriate ceramic materials for the actual design of the metal – ceramic assembly. The greatest emphasis is given to design of the optimal configuration of the insulator and electrode, which is supported by simulations from the software that implements finite element method. Eventually, the high voltage tests of the assembly used for measuring leakage currents are performed.
|
|
|
Testing of Surge Arresters
Jeřábek, Lukáš ; Paar, Martin (referee) ; Krbal, Michal (advisor)
This bachelor's thesis is devoted to metal oxide surge arresters. After historical and theoretical introduction, which explains their principles and describes their characteristical properties, analysis of the standard IEC 60099-4 and testing according to the standard with focus on the type tests follows. This chapter is also amended with review of the standard's imperfections and with its most probable future development. The work concludes with a market survey, a review of the largest manufacturers and a comparison of their products.
|
|
|
Technical design of extensive replacement of overhead lines by HV cables in given distribution area
Bracek, David ; Kolacia, Tomáš (referee) ; Ptáček, Michal (advisor)
This diploma thesis deals with the technical design of extensive replacement of overhead lines by high voltage cables in the given distribution area. In its first part the thesis is focused on the survey of the concerning legislation and technical standards, which must be followed during making technical design documentation. It also mentions the processes which precede the replacement itself. There are also the operational differences between the overhead lines and the high voltage cables in the first part, too. The second part is focused on the technical description of the given area, the technical design of the replacement by high voltage cables and the realization of calculation, which is important as a base for further realization of technical arrangements. The consideration of technical feasibility and economic efficiency are also contained in the second part.
|
|
| |
guest ::
